Quick Tech Hobby Over 75,000 Radio Control Products

ACE4542  Cloud Dancer 40 ARF 60 inches

This kit features state-of-the-art engineering that provides quick and easy assembly of a strong, yet lightweight airplane that will give you an enjoyable and thrilling experience

Specification:
 Wing Span: 60"
 Length: 46.75"
 Weight: 4 lbs
 Req. Engine: .40 - .46 - 2 Cycle
  .40 - .54 - 4 Cycle
 Req. Radio: 4 Channel

One of the finest 40 sized sport planes available. Designed by the late Fred Reese, this airplane offers a unique appearance and sprightly, yet predictable performance.

Cloud Dancer sports a double-tapered wing, a unique diamond-shaped tail group wide-stance landing gear and wheel pants, and sleek fuselage with bubble canopy. All of which results in a truly handsome airplane of which you can be proud. Install the optional retractable landing gear, and watch the Cloud Dancer transform into the next level of awesome performance and good looks. Available in both a 40 size and a 60 size, the Cloud Dancer comes Almost-Ready-To-Fly; completely built from balsa/ply and skillfully covered with UltraCoteŽ.

Features:
  • Skillfully built from balsa/ply and covered with UltraCoteŽ
  • State-of-the-art engineering that provides quick and easy assembly
  • Sleek lines and tapered wing provides clean, smooth performance
  • Set-up for fixed gear or optional retracts
  • Available in 40 size or 60 size
  • Smooth flying airplane for first time low wing pilot
  • Bright covering scheme makes it easy to track in the sky

 Requirements:
  • Radio Set - Transmitter (4 channels), Standard Servos - x5, Receiver, Battery, Foam, Rubber Band.
  • Engine - Airplane engine (PRO-46 or F-54s), Glow Plug, Glow Fuel (10% - 15%), 1.5V Glow Starter,
    12V Fuel Pump, 12V Battery, 12V Electric Starter, Glow Plug Wrench.
  • Adhesives - 5 minute Epoxy (4 ounces), 30 minute Epoxy (4 ounces), "Thin" Instant adhesive (1/2 ounces),
    "Thick" Instant adhesive (1/2 ounces), Epoxy mixing sticks or brushes
  • Tools - Ruler, Hobby knife and blades, 90 degree triangle, Rubbing alcohol, Paper towels, Waxed paper, Masking tape,
    Fine-point or felt-tip pen, Phillips and flat head screw drivers, Drill bits (1/16", 5/64", 3/32", 5/32", 3/16").