ACE4559 Cloud Dancer 60 ARF 72 inches

ACE4559 Cloud Dancer 60 ARF 72 inches

	This kit features state-of-the-art engineering that provides quick and easy assembly of a strong, yet lightweight airplane that will give you an enjoyable and thrilling experience. Specification: Wing Span: 72 " Length: 57" Wing Area: 840 in. Weight: 6.5 - 7 lbs. Req. Engine: .61 - 2 Cycle .91 - .1.20 - 4 Cycle Req. Radio: 4 Channel
One of the finest 60 sized sport planes available. Designed by the late Fred Reese, this airplane offers a unique appearance and sprightly, yet predictable performance. Cloud Dancer sports a double-tapered wing, a unique diamond-shaped tail group wide-stance landing gear and wheel pants, and sleek fuselage with bubble canopy. All of which results in a truly handsome airplane of which you can be proud. Install the optional retractable landing gear, and watch the Cloud Dancer transform into the next level of awesome performance and good looks. Available in both a 40 size and a 60 size, the Cloud Dancer comes Almost-Ready-To-Fly; completely built from balsa/ply and skillfully covered with UltraCote®.
Features: Skillfully built from balsa/ply and covered with UltraCote® State-of-the-art engineering that provides quick and easy assembly Sleek lines and tapered wing provides clean, smooth performance Set-up for fixed gear or optional retracts Available in 40 size or 60 size Smooth flying plane for first time low wing pilot Bright covering scheme makes it easy to track in the sky
Requirements: Radio Set - Transmitter (4 channels), Standard Servos - x5, Receiver, Battery, Foam, Rubber Band. Engine - Airplane engine (PRO-61 or F-91s), Glow Plug, Glow Fuel (10% - 15%), 1.5V Glow Starter, 12V Fuel Pump, 12V Battery, 12V Electric Starter, Glow Plug Wrench. Adhesives - 5 minute Epoxy (4 ounces), 30 minute Epoxy (4 ounces), "Thin" Instant adhesive (1/2 ounces), "Thick" Instant adhesive (1/2 ounces), Epoxy mixing sticks or brushes Tools - Ruler, Hobby knife and blades, 90 degree triangle, Rubbing alcohol, Paper towels, Waxed paper, Masking tape, Fine-point or felt-tip pen, Phillips and flat head screw drivers, Drill bits (1/16", 5/64", 3/32", 5/32", 3/16").