TTR4102 Windstar 2m Glider ARF 77

TTR4102 Windstar 2m Glider ARF 77.3 inches

TTR4103 Windstar 2m EP Glider ARF 77.3 inches

Specification: Wing Span: 77.3" Wing Area: 574" sq. in. Length: 44.5 " Weight: 32 - 39 oz. Radio: 2 Channel	Specification: Wing Span: 77.3" Wing Area: 574" sq. in. Weight Loading: 13 - 13.8 oz. sq. ft. Length: 44.5 " Weight: 52 - 55 oz. Radio: 3 Channel

You can enjoy the quiet tranquility of silent flight with the Windstar. The nature of soaring makes it a perfect way to get started in R/C. Break the bounds of earth and soar with the eagles!	You can enjoy the quiet tranquility of silent flight with the Windstar EP. Windstar can begin to soar with a simple toss into the wind. As you search for thermals the wings will be your guide to reaching heights eagles CAN ATTAIN. Break the bounds of earth and soar with the eagles!
Slow, graceful flight characteristics gives you more reaction time and is more forgiving than a 40 powered trainer, which is particularly important if you don't have an instructor. Also silent flight is more friendly to your neighbors and the environment. Being an ARF does away with the biggest objection to sailplanes which is the tedious building of a 2 meter wing! All the building and covering is done for you so you can experience the benefits of soaring without the hard work. The Windstar available in two versions: unpowered and electric powered. With the unpowered version, you use a catapult system called a "hi-start" or a winch to gain altitude and then glide down for a gentle landing. The electric powered version uses a motor and efficient folding prop to take the plane to soaring altitude.
The fastest building, best looking 2 meter sailplane Proven airfoil and polyhedral wing design make it the ideal entry-level sailplane Outstanding Slope or Thermal performance Smooth, stable and forgiving flight characteristics along with low wing loading make it exceptional competition machine in "light air" Custom-built and covered by skilled craftsmen, allowing for quick and easy assembly	The fastest building, best looking electric powered sailplane available Includes motor pack and propeller set Proven airfoil and polyhedral wing design make it the ideal electric soarer Outstanding Thermal performance Smooth, stable and forgiving flight characteristics along with low wing loading make it exceptional electric powered soaring machine Custom-built and covered by skilled craftsmen, allowing for quick and easy assembly
Requires: Radio Set - 2 Channel radio, Transmitter battery x8, lead for balancing, Receiver and battery pack, Foam rubber padding (Approx. 1/4 thick). Adhesives - 5 minute Epoxy, Instant setting Cyanoacrylate adhesive (thin CA), Instant setting Cyanoacrylate adhesive (medium CA), 30 minute Epoxy. Tools - Hobby knife and blades, Fine-point or felt-tip pen, Small phillips and flat head screw drivers, 1/2 Masking Tape, Mixing sticks for Epoxy, Medium grit paper, Rubbing alcohol, Light viscosity Oil, Waxed paper, "Z" bend pliers, Drill bits (1/16", 1:8"), Paper Towels, #64 rubber bands	Requires: Radio Set - 3 Channel radio, Receiver and battery pack, lead for balancing, Foam rubber padding (Approx. 1/4 thick). Adhesives - 5 minute Epoxy, Instant setting Cyanoacrylate adhesive (thin CA), Instant setting Cyanoacrylate adhesive (medium CA), 30 minute epoxy. Tools - Hobby knife and blades, Fine-point or felt-tip pen, Small phillips and flat head screw drivers, 1/2 Masking Tape, Mixing sticks for Epoxy, Medium grit paper, Rubbing alcohol, Light viscosity Oil, Waxed paper, "Z" bend pliers, Drill bits (1/16", 1/8"), Paper Towels, 90 degree triangle.