Quick Tech Hobby Over 75,000 Radio Control Products

TTR4307  Sparky 400 ARF 57 inch

TTR4307F01  Sparky 400 SC 57 inches

Reminiscent of a time when things were more relaxed and life happened at slower pace; everything was simpler...easier. Now
you can enjoy this "old-timer" feeling with the sparky.

Specification:
 Wing Span: 57"
 Wing Area: 360 sq. in.
 Length: 34 "
 Weight: 1.6 lbs.
 Motor: 400PH
 Req. Radio: 2- 3 Channel
This almost-ready-to-fly airplane is completely built and covered by skilled craftsmen. Construction is sturdy and repairable liteply and balsa wood. A few hours of enjoyable assembly puts you in command of your own R/C airplane.

It features State-of-the-art engineering that provide quick and easy assembly of a strong, yet lightweight, airplane that will provide you with an enjoyable and educational experience. A large wing span, high aspect ratio elliptical wing provides ultra-stable and slow flight, perfect for the beginner or an experienced pilot looking for relaxation. Sparky is a electric powered version.

SC = Super Combo (Includes Radio Set and Propulsion System)
Features:

  • State-of-the-art engineering that provide quick and easy assembly

  • High aspect ratio elliptical wing and tail provides ultra-stable and slow flight

  • Pre-built and covered with transparent UltraCoteŽ

  • Custom-built and covered by skilled craftsmen

  • Perfect trainer or relaxing sport plane

  • "Old-Timer" charm and flight characteristics

  • Available as ARF or Super Combo
Requires:

  • Radio Set - Transmitter (3 channels), x2 standard servos or x2 micro servos, Receiver and battery pack.

  • Propulsion System - Electric Drive System 400PH (motor & gearbox), Electronic Motor Controller (Speed Control)
    for x3 channel radio, Flight Battery 8.4V 900 mAh NiMH, Quick Charger 8.4V

  • Adhesives - 5 minute Epoxy, 20 - 30 minute Epoxy, Instant setting Cyanoacrylate adhesive (thin CA), Instant setting
    Cyanoacrylate adhesive (thick CA).

  • Tools - Hobby knife and blades, Fine-point or felt-tip pen, Small phillips and flat head screw drivers, Masking Tape,
    Mixing sticks for Epoxy, Medium grit paper, Rubbing alcohol, Drill bits, Paper Towels, 90 degree triangle.