TTR4308 Ehawk 2000 EP ARF 80

TTR4308 Ehawk 2000 EP ARF 80.7 inch

	The world of electric powered sailplanes can be extremely challenging and rewarding experience. Your skill along with the design capabilities of the eHawk 2000 will combine to defy the laws of gravity! Specification: Wing Span: 80.7 " Wing Area: 524 sq. in. Wing Loading: 14.6 oz./sq. ft. Length: 38.6 " Weight: 51 oz. Motor: 540 Motor included Req. Radio: 2 -3 Channel
The choice is easy if your looking for high performance with longer powered flight times in the eHawk 2000. As you gain experience with your model you will be able to "feel" the wing and lift conditions that affect it enabling you to greatly extend your flight time performance. The eHawk 2000 is an electric powered 2-meter sailplane which is intended for use in light to medium wind and lift conditions. Its airfoil, motor package and design planform are intended to maximize performance under those flying conditions and will provide great results for pilots of all skill levels. Assembly is simple and fast requiring a couple evenings to assemble. Hand launch is simple and effortless as the 540 motor will carry it aloft at a surprising rate of climb. Perfect for your flying site or glider launch slope. The eHawk 2000 is set up for individual aileron control, elevator and speed control. For even more exhilarating aerobatics, add rudder control.
Features: Assembly is simple and fast requiring a couple evenings to assemble A beautiful tough ABS fuselage Sheeted and covered 2-part wing Finished tail surfaces Includes 540-power package with an optimized 8x4.5 folding prop Will provide great results for pilots of all skill levels
Requires: Radio Set - Transmitter (2 - 3 channels), Micro Servos - x3, Receiver, Battery. Propulsion System - Electronic Motor Controller (Speed Control) for x3 channel radio, Flight Battery 8.4-9.6V 1200-2000 mAh NiMH, Quick Charger, Extension wire (2 servo extensions plus Y harness are required. If you are going to use Flaperon then it will require 2 servo extensions which are 15" in length minimum. Adhesives - Instant setting Cyanoacrylate adhesive (thin CA), Instant setting Cyanoacrylate adhesive (thick CA), 5 minute Epoxy. Tools - Ruler, Hobby knife and blades, Scissors, Curved Scissors, Fine-point or felt-tip pen, "Z" bend pliers, Small phillips and flat head screw drivers, Drill bits (1/16", 5/64", 1/8", 3/16"), Paper Towels, Medium grit sandpaper, Mixing sticks for epoxy.