Quick Tech Hobby Over 75,000 Radio Control Products

EHawk 1400 ARF Magenta/Yellow/Blue Vspec EP 55 inch

EHawk 1400 Super Combo Magenta/Yellow/Blue Vspec EP 55 inch

The world of electric powered sailplanes can be extremely challenging and rewarding experience. Your skill along with the design capabilities of the eHawk 1400 will combine to defy the
laws of gravity!

Specification:
 Wing Span: 55 "
 Wing Area: 300 sq. in.
 Wing Loading: 10oz./sq. ft.
 Length: 31 "
 Weight: 21 oz.
 Motor: 380PH Motor included
 Req. Radio: 2 -3 Channel
The choice is easy if your looking for high performance with longer powered flight times in the eHawk 1400. This beauty combines a proven airfoil with Hoerner tips giving the eHawk unprecedented powered and slow speed performance.

The eHawk 1400 features a beautiful gel-coated fiberglass fuselage, sheeted and covered 2-part wing, finished tail surfaces and matched 380-power package, with an 6x3-folding propeller. Assembly is simple and fast requiring about two hours to assemble. Hand launch is simple and effortless as the 380 motor will carry it aloft at a surprising rate of climb. Perfect for your flying site or glider launch slope. The eHawk 1400 is set up for aileron control, elevator and speed control.

SC = Super Combo Version

Includes Radio Set and Propulsion System

 
Features:

  • Engineered to go together quickly and easily

  • Gel-coated fiberglass fuselage

  • Sheeted and covered 2-part wing

  • Finished tail surfaces

  • Includes 380PH electric motor and 6x3 folding propeller

  • Will provide great results for pilots of all skill levels
Requires:

  • Radio Set - Transmitter (3 channels), Micro Servos - x2, Receiver, Battery.

  • Propulsion System - Electronic Motor Controller (Speed Control) for x3 channel radio, Flight Battery 8.4-9.6V-
    1000-1200 mAh NiMH, Quick Charger.

  • Adhesives - Instant setting Cyanoacrylate adhesive (thin CA), 12 minute Epoxy.

  • Tools - Ruler, Hobby knife and blades, Scissors, Curved Scissors, Fine-point or felt-tip pen, "Z" bend pliers,
    Small phillips and flat head screw drivers, Drill bits, Paper Towels, Medium grit sandpaper, Mising sticks for epoxy