Quick Tech Hobby Over 75,000 Radio Control Products

TTR4313  Soaring Star 2m EP ARF 78.75 inches

The world of electric powered sailplanes can be an extremely challenging and rewarding experience. Your skill along with the design capabilities of the Soaring Star EP will combine to defy the laws of gravity!

Specification:
 Wing Span: 78.75"
 Wing Area: 532.5" sq. in.
 Wing Loading: 13.8 oz.
 Length: 41.25"
 Weight: 50 - 52 oz.
 Radio: 4 Channel
 Motor: 540 included
It has been engineered to go together quickly and easily while still providing you with great looks and exceptional flying performance. The world of soaring or silent flight as many call it, can be extremely challenging and rewarding experience.

The Soaring Star EP can stay aloft for hours from a single battery charge! Covered in rugged and repairable UltraCoteŽ done up in a handsome and highly visible magenta and yellow color scheme. Be the envy of the flying field by showing up with a Soaring Star EP. In light to medium wind conditions its airfoil motor package and design planform are intended to maximize performance under those flying conditions and will provide great results for pilots of all skill levels.

Features:

  • The fastest building, best looking electric powered sailplane available

  • Includes 8x4.5 folding propeller and 540 motor

  • Pre-built and covered in rugged and repairable UltraCoteŽ

  • Fiberglass fuselage with T-tail design

  • Dual servos for aileron control surfaces

  • Efficient RG-15 wing airfoil

  • Removable main wing and tail

  • Smooth, stable and forgiving flight characteristics

  • Custom-built and covered by skilled craftsmen, allowing for quick and easy assembly
Requires:

  • Radio Set - 3 to 4 Channel radio, x4 micro servos, Receiver and battery pack, Lead for balancing,
    Foam rubber padding (Approx. 1/4 thick).

  • Adhesives - 5 minute Epoxy, Instant setting Cyanoacrylate adhesive (thin CA), Instant setting
    Cyanoacrylate adhesive (medium CA).

  • Tools - Hobby knife and blades, Fine-point or felt-tip pen, Small phillips and flat head screw drivers,
    1/2 Masking Tape, Mixing sticks for Epoxy, Medium grit paper, Rubbing alcohol, Light viscosity Oil,
    Waxed paper, "Z" bend pliers, Drill bits (1/16", 5/64", 1/8", 3/16"), Paper Towels, 90 degree triangle