Quick Tech Hobby Over 75,000 Radio Control Products

TTR4529  Lazy Tiger P51 - 53.5 inch

The Thunder Tiger Lazy Tiger series combine these elements together with a scale-like appearance resulting in a comic characture of the real plane that is, in a word, "cute".

Specification:
 Wing Span: 53.5"
 Wing Area: 740 sq in.
 Length: 42"
 Weight: 2.5-3.5 lbs.
 Req. Engine: .20-.30 2 & 4-Cycle
 Req. Radio: 4 Channel
Now this popular category of slow and low flight can be enjoyed without the need to spend countless hours in the workshop building an airplane kit. This ARF "Lazy Tiger" is completely built from conventional materials and covered with top-quality UltraCoteŽ.

In recent years, outdoor Slow flying has gained popularity amongst R/C flyers. Slow Flying has the advantages of economy and relaxation, yet can provide the thrills of the tight aerobatics done low and slow. A low aspect ratio wing with a high lift airfoil ( short and fat ), a short tail moment, and light weight combine to produce these characteristics.
Features:

  • Balsa and ply construction, completely built by skilled craftsmen

  • Completely built from conventional materials and covered with top-quality UltraCoteŽ

  • "Almost-Ready-To-Fly" engine/radio installation and final assembly are all that is required

  • Slow flight characteristics and crisp maneuverability makes it a ball to fly

  • Economical operation in limited sized flying fields
Requires:

  • Radio Set - Transmitter (4 channels), Standard Servos - x5, 2 aileron servos can be standard or mini, Receiver, Battery,
    Foam, Rubber Band.

  • Engine - Airplane engine (.15 to.25 - 2 Cycle), (.20 to .30 - 4 Cycle), Glow Plug, Glow Fuel (15%), 1.5V Glow Starter,
    12V Fuel Pump, 12V Battery, 12V Electric Starter, Glow Plug Wrench.

  • Adhesives - Instant setting Cyanoacrylate adhesive (thin CA), Slow setting Cyanoacrylate adhesive (thick CA),
    10 minute Epoxy (fast), 20 - 30 minute Epoxy (slow), Zap-a-dap-a-goo, Shoe-goo or equivalent.

  • Tools - Ruler, Hobby knife and blades, Scissors, Steel straight edge, Long nose pliers and diagonal cutting pliers,
    Fine-point or felt-tip pen, Phillips and flat head screw drivers, Drill bits (1/16", 5/64", 3.4mm), T-pins, Rubbing Alcohol,
    Masking Tape.