Quick Tech Hobby Over 75,000 Radio Control Products

TTR4532  Piper J-3 Cub ARF 82.7 inch

One of the most recognized names in aviation history is the Piper J-3 Cub. A child of the Depression, Mr. Piper's Cub began production in the early '30s, evolving into the 65 HP J-3 version in 1939.

Specification:
 Wing Span: 82.7"
 Wing Area: 850 sq in.
 Length: 48 "
 Weight: 6.5 - 7.5 lbs.
 Req. Engine: .46 -.61 - 2-Cycle
 .50 - .91 - 4-Cycle
 Req. Radio: 4 Channel
Proliferating in the years before and during WWII, the Cub has introduced more young men to the joys of flight than any other airplane ever. Now you can own a part of aviation's history and enjoy the relaxing and realistic flight characteristics of the venerable J-3 Cub.

Thunder Tiger's ARF J-3 has been meticulously built from the finest material and covered with UltraCoteŽ in the classic Cub Yellow color scheme. Scale details such as wing struts, landing gear bungees, Cub wheels, accurately contoured fuselage, and foe engine cylinder heads create a head-turning beauty. Only a few hours of enjoyable assembly and you are ready to step back in time and be a part of history by flying the classic, IMAA legal J-3 Cub
Features:

  • State-of-the-art engineering that provide quick and easy assembly

  • Pre-built and covered with repairable UltraCoteŽ

  • Custom-built and covered by skilled craftsmen

  • Scale details include wing struts, bungees, Cub wheels, and dummy engine cylinders

  • After a few hours of enjoyable assembly and you are ready to fly

  • Authentic Piper J-3 Cub color scheme

Requires:

  • Radio Set - Transmitter (4 channels), Standard Servos - x5, Receiver, Battery, Foam, Rubber Band.

  • Engine - Airplane engine (.40 to .61 - 2 Cycle), (.50 to .91 - 4 Cycle), Glow Plug, Glow Fuel (10% - 15%), 1.5V Glow Starter, 12V Fuel Pump, 12V Battery, 12V Electric Starter, Glow Plug Wrench.

  • Adhesives - Instant setting Cyanoacrylate adhesive (thin CA), Slow setting Cyanoacrylate adhesive (thick CA),
    10 minute Epoxy (fast), 20 - 30 minute Epoxy (slow), R/C 56 Glue.

  • Tools - Ruler, Hobby knife and blades, Scissors, Steel straight edge, Long nose pliers and diagonal cutting pliers,
    Fine-point or felt-tip pen, Phillips and flat head screw drivers, Drill bits, T-pins, Sanding block.