Quick Tech Hobby Over 75,000 Radio Control Products

TTR4557  Tiger Bipe 49 inch

This kit features state-of-the-art engineering that provides quick and easy assembly of a strong, yet lightweight airplane. Now you can hearken back to a time when pilots were pilots and real airplanes had two wings.

Specification:
 Wing Span: Top 49", Bottom 46"
 Wing Area: 635 sq. in.
 Length: 43"
 Weight: 4.5 lbs
 Req. Engine: .36 - 2 Cycle
  .35 - .54 - 4 Cycle
 Req. Radio: 4 Channel
Wipe the castor oil off your goggles and take a look at the Tiger Bipe 40, a handsome sport biplane perfect for a PRO-36 or F-54-S engine. Standard servos go into this compact airplane that fits in most vehicles without disassembly.

Once airborne, spritely yet predictable flight is to be expected from this sensible design. This Almost-Ready-To-Fly airplane is meticulously built from balsa/ply and covered with UltraCoteŽ. A few hours of final assembly plus radio and engine installation and you are ready to take to the sky. The Tiger Bipe will allow you to enjoy model airplanes the way they were meant to be: with two wings!
Features:

  • State-of-the-art engineering that provides quick and easy assembly

  • Almost-Ready-To-Fly airplane is meticulously built from balsa/ply and covered with UltraCote

  • Since the Tiger Bipe is built and covered, don't let the thought of building two wings keep you
    from owning a biplane

  • Enjoy the appeal of an open cockpit biplane with the Tiger Bipe 40. Its classic lines look great
    on the ground and in the air

  • Perfect for an economical PRO-36 or enjoy the pulling power and realistic sound of an F-54S
    four stroke engine

  • Good for mild aerobatics or just your casual sunday flight

  • Generous wing area for great flight characteristics
Requires:

  • Radio Set - Transmitter (4 channels), Standard Servos - x5, Receiver, Battery, Foam, Rubber Band.

  • Engine - Airplane engine (PRO-36 or F-54s), Glow Plug, Glow Fuel (10% - 15%), 1.5V Glow Starter,
    12V Fuel Pump, 12V Battery, 12V Electric Starter, Glow Plug Wrench.

  • Adhesives - 5 minute Epoxy (4 ounces), 30 minute Epoxy (4 ounces), "Thin" Instant adhesive (1/2 ounces),
    "Thick" Instant adhesive (1/2 ounces), Epoxy mixing sticks or brushes

  • Tools - Ruler, Hobby knife and blades, 90 degree triangle, Rubbing alcohol, Paper towels, Waxed paper, Fine-point
    or felt-tip pen, Phillips and flat head screw drivers, Drill bits (1/16", 5/64", 3/32", 5/32", 3/16").