Quick Tech Hobby Over 75,000 Radio Control Products

TTR4568  Imagine 50 ARF 54 inch

Thunder Tiger proudly introduces one of their finest ARF's to date. Designed by famous Tsugutaka Yoshioka from Japan, now available in a ARF version that only takes you a few hours of assembly.

Specification:
 Wing Span: 54 "
 Wing area: 554 sq. in.
 Length: 55 "
 Weight: 5.5 - 5.75 lbs.
 Engine: .40 - .46 2-Cycle
 .52 - .72 4-Cycle
 Radio: 4 Channel
Furnished aileron servo trays and hatch cover for low profile and standard servo respectively. The Imagine 50's strong, lightweight frame provides instant acceleration and nimble responsiveness for very impressive performance. Custom-built and covered by skilled craftsmen.

Precisely laser cut balsa and liteply structure with bright Oracover/UltracoteŽ covered which gives a very distinctive appearance that makes it stand out on the flight line. High contrast color scheme provide excellent visibility on any day. The Imagine 50 stands out at the field and is truly a plane you can be proud of.
Features:

  • State-of-the-art engineering that provide quick and easy assembly

  • Pre-built and covered in a bright color scheme with rugged and repairable Oracover/UltraCoteŽ

  • Custom-built and covered by skilled craftsmen with balsa and plywood

  • Fiberglass engine cowl and wheel pants

  • Adjustable engine mount for .40 ~ .46 - 2C engine

  • Pull-Pull system for rudder control surface

  • Perfect for aerobatic maneuvers
Requires:

  • Radio Set -4 Channel radio, x5 standard servos, Receiver and battery pack, Foam rubber
    padding (Approx. 1/4 thick), x1 "Y" style extension wire

  • Engine - Airplane engine 2 Cycle (.45 - .61), 4 Cycle (.52 - .72), Glow Plug, Glow Fuel (10% - 15%),
    1.5V Glow Starter, 12V Fuel Pump, 12V Battery, 12V Electric Starter, Glow Plug Wrench.

  • Adhesives - 5 minute Epoxy or 30 minute Epoxy, Instant setting Cyanoacrylate adhesive (thin CA)
    or Instant setting Cyanoacrylate adhesive (medium CA).

  • Tools - Hobby knife and blades, Fine-point or felt-tip pen, Phillips and flat head screw drivers, Long nose pliers,
    Diagonal cutting pliers, Mixing sticks for Epoxy, Steel straight edge, Drill bits (1/16, 5/64, 3/32, 3/8)
    Paper Towels, 90 degree triangle, Scissors.