Exprit VT-11 EP ARF 59 inches - KAV6625

Have you dreamed of building and flying a sleek, aerobatic, composite construction aircraft? With Esprit VF-II you can fly 175 knots while commanding a wingspan of 6090 mm (20'). The Esprit has won many awards and as a home built aircraft assembles in 1500-2000 hours.

Esprit VF-II
Electric ARF

The Swiss designer, Valentino Fry is not only an innovative designer but also an accomplished full-scale aerobatic and RC model pilot.
KAVAN's semi-scale Esprit is for the model pilot; a little smaller but with similar beauty and energy of the full-scale airplane. Likely the World's largest mass produced Depron ParkFlyer, Esprit uses manufacturing techniques to ensure maximum strength with minimal weight. Factory joined fuselage halves with internal bulkheads and foam wings with internal ribs all factory painted. The slightly nonsymmetrical RIZ 1-30-15 airfoil is good for sport aerobatics while providing the model with gentle flight characteristics.

For flexibility, the battery tray is mounted on the center of gravity so you can use Li-Po or "normal" cells without having balance problems. The battery is easily removed by lifting the canopy. The undercarriage is made of sturdy steel wire and aerodynamically covered with Depron. For grass field landings the wheel pants can be easily removed. Removable wing for convenient transport. The firewall will accept a variety of motors from normal brushed motors with gearbox up to brushless Outrunners. A unique ParkFlyer with excellent flight characteristics that will excite the field and help satisfy a dream
Specifications
Wing Span 59 in 1500 mm
Wing Area 580.5 inē 37.45 dmē
Length 52 in 1320 mm
Flying Weight 63.5 oz approx. 1800 g
Elevator area 139.5 inē 9 dmē
Wing airfoil Ritz 1-30-15 Ritz 1-30-15
Radio Required 4- Channel, Micro receiver, 4 Mini Servos (.60 - .80 oz 17 g - 25 g)