Sig Manufacturing Free Flight Kits

SIGFF24 SIG MINI-MAXER KIT	SIG FF23 SIG MR MULLIGAN KIT

Wingspan: 23 in. Length: 26 in. Capable of Very Long Flights This little gem is from the drawing board of George Perryman, veteran free flight designer and competitor. It’s a smaller version of his familiar Unlimited Rubber design. A pop-up tail de-thermalizer is standard equipment to keep this little airplane from going cloud hopping.	Wingspan: 20 in. 1972-1973 NATIONALS WINNER 1st Open Rubber Scale by Tom Stark 1st Jr. Rubber Scale by Rebecca Stark Free-Flight Rubber Scale At Its Best! This is a scale model that flies as good as it looks! It’s a Nationals winner! Builders of typical sport cabin rubber airplanes will have no difficulty with the scale structure of this racing beauty. The 8-page instruction book provides a step-by-step building outline and includes tips for competition flying performance.
Mini -Maxer Kit Features ... Die-cut SIG Balsa Parts Molded Plastic Propeller SIG Contest Rubber Motor Tissue Covering Material Detailed Full-Size Plans Building & Flying Instructions	Mr.Mulligan Kit Features ... Die-cut SIG Balsa Parts Molded Plastic Propeller SIG Contest Rubber Motor Formed Wire Landing Gear Scale Decals Tissue Covering Material Detailed Full-Size Plans Building & Flying Instructions
SIG FF21 SIG 29ER KIT	SIG FF20 SIG CABINAIRE KIT

Wingspan: 20 1/2 in. Length: 16 in. The ’29er captures the familiar parasol look of the famous aircraft of aviation's "Golden Age" in an attractive blend of lines and function. A particularly stable model because of the high wing position, the difficulties usually found in this type of wing mounting have been eliminated by a simple, effective construction procedure. The designer has written an 8-page booklet covering all phases of assembly. The trimming and testing sections are an education in the basics of model flying. The ’29er takes its place beside the CABINAIRE as a top notch sport rubber-powered kit.	Wingspan: 22 in. Weight: 1-2 oz. The classic lines and appearance of the high-wing cabin monoplanes of aviation's "Golden Age" in the 1930’s have been blended into the CABINAIRE. Designer Paul McIlrath is a nationally known specialist on small size scale-like sport rubber jobs. His experience and attention to detail is evident in the carefully developed structure of this beautiful flying model.
The '29er Kit Features ... Die-cut SIG Balsa Parts Molded Plastic Propeller SIG Contest Rubber Motor Formed Wire Landing Gear Tissue Covering Material Detailed Full-Size Plans Building & Flying Instructions	The Cabinaire Kit Features ... Die-cut SIG Balsa Parts Molded Plastic Propeller SIG Contest Rubber Motor Formed Wire Landing Gear Tissue Covering Material Detailed Full-Size Plans Building & Flying Instructions
SIG FF25 SIG MONOCOUPE KIT	SIG FF26 SIG CUSTOMAIRE KIT

Wingspan: 24 in. Length: 16 in. 1973 NATIONALS WINNER 1st Open Rubber Scale by Tom Stark The full-size Monocoupe was always known for its exceptional flight performance. Tom Stark’s model of this classic lightplane has proved to be a winner from its first test flight. Now you can duplicate this little beauty for your own enjoyment	Wingspan: 20 in. Length: 18 in A Scale-Like Free-Flight Rubber Model Reminiscent of the classic Waco Cabin Biplanes of the 1930s, the CUSTOMAIRE is our most challenging to build rubber powered F/F kit. It is intended for the experienced stick and tissure modeler who is looking for a scale-like model that flies like a sport airplane. The CUSTOMAIRE is not recommended for beginners, who should start with a simpler airplane such as the SIG TIGER. Included with the CUSTOMAIRE are a vac-u-formed ABS plastic Cowling, Dummy Engine, Wheel Pants, and Wheels.
The Monocoupe Kit Features ... Die-cut SIG Balsa Parts Molded Plastic Propeller SIG Contest Rubber Motor Scale Decals Formed Wire Landing Gear Tissue Covering Material Detailed Full-Size Plans Building & Flying Instructions	The Customaire Kit Features ... Die-cut SIG Balsa Parts Molded Plastic Propeller SIG Contest Rubber Motor Scale Decals Formed Wire Landing Gear Tissue Covering Material Detailed Full-Size Plans Building & Flying Instructions
SIF FF22 SIG TIGER KIT	SIF FF5 SIG AMA CUB KIT

Wingspan: 21 1/2 in. Weight: 1 oz. A New Version of an Ageless Old-Timer The SIG TIGER is a miniature edition of that typical rubber-powered model of the 1930’s, popularly called the “Outdoor Commercial”. These simple designs, featuring a box fuselage with a cabin, introduced thousands of novices to the thrill of building a model that really flew. In designing the SIG TIGER, Paul McIlrath retained the fine flight performance and added a pleasant, scale-like appearance. The simplicity of this design make it ideal for beginners or a for modeling class project	Wingspan: 12 1/2 in When Hall of Fame modeler Frank Ehling set out to design a simple little rubber power model that AMA could use to introduce newcomers to the hobby, he probably never thought he was drawing up the most popular model airplane of all time. This is the same model that has been used since 1968 in beginner’s promotions around the world. Very easy to build, yet can turn in some amazing flights.
The Sig Tiger Kit Features ... Die-cut SIG Balsa Parts Molded Plastic Propeller SIG Contest Rubber Motor Formed Wire Landing Gear Plastic Wheels Tissue Covering Material Detailed Full-Size Plans Building & Flying Instructions	The AMA CUB Kit Features ... A Ready-To-Use One-Piece Balsa Stick Fuselage Printed Covering Material On Which The Wings And Tail Surfaces Are Constructed A Ready-To-Use Molded Plastic Propellor Assembly SIG Contest Rubber Motor Detailed Building And Flying Instructions The Kit Includes Everything Except The Glue!
SIG FF12 SIG THERMAL DART KIT	SIG FF1 SIG CUB KIT

Wingspan: 24 in Like it’s little brother the AMA CUB, this ultra-simple rubber powered model is an amazing flyer. Out performs more sophisticated models. Simple to build!	Wingspan: 23 1/2 in. Length: 22 3/4 in. Weight: 1 oz. Flies Up To 1,000 Feet! The SIG CUB was designed to be a simple, but capable, “advanced trainer” for modelers learning the ins and outs of trimming a F/F model. This little gem is capable of long high flights, limited only by the developing flier’s knowledge
The Thermal Dart Kit Features ... A Ready-To-Use One-Piece Balsa Stick Fuselage Printed Covering Material On Which The Wings And Tail Surfaces Are Constructed A Ready-To-Use Molded Plastic Propellor Assembly SIG Contest Rubber Motor Detailed Building And Flying Instructions The Kit Includes Everything Except The Glue!	The Sig Cub Kit Features ... Die-cut Balsa Parts Molded Plastic Propeller Molded Plastic Wheels SIG Contest Rubber Motor Covering Material Detailed Building And Flying Instructions Detailed Full-Size Plans
SIG FF4 SIG AMA RACER KIT	SIG FF15 SIG PARASOL KIT

Wingspan: 18 in The AMA RACER is another model designed by Frank Ehling for beginners. Very similar to the legendary AMA CUB, only bigger and with a few more advanced features. For instance, the wing position on the AMA RACER is adjustable for more exact flight trimming. It is very easy to build, yet turns in amazing flights	Wingspan: 18 in. Looks Scale! Taking a page from the ultra-simple AMA CUB design, designer Clark Ross came up with the PARASOL. This scale-like rubber model has a "profile" fuselage which you build, along with the wings and tail, right on the pre-printed covering material. No painting is required! Looks like a scale job in the air, but only half the work. Flies great!
The AMA Racer Kit Features ... A Ready-To-Use One-Piece Balsa Stick Fuselage Printed Covering Material On Which The Wings And Tail Surfaces Are Constructed A Ready-To-Use Molded Plastic Propellor Assembly SIG Contest Rubber Motor Detailed Building And Flying Instructions The Kit Includes Everything Except The Glue	The Parasol Kit Features ... Printed Covering Material On Which The Wings, Fuselarge, And Tail Surfaces Are Constructed A Ready-To-Use Molded Plastic Propellor Assembly SIG Contest Rubber Motor Formed Wire Landing Gear and Plastic Wheels Are Included Detailed Building And Flying Instructions The Kit Includes Everything Except The Glue!
SIG FF13 SIG PIGEON KIT	SIG FF14 SIG FLIP KIT

Wingspan: 12 in Free Flight hand launched gliders are a tremendous amount of fun! When properly built and trimmed, they are capable of long, graceful flights that will thrill every model enthusiast. The PIGEON, and its cousin the FLIP, are easy to build and fly. They can provide many hours of simple flying enjoyment.	Wingspan: 14 in Free Flight hand launched gliders are a tremendous amount of fun! When properly built and trimmed, they are capable of long, graceful flights that will thrill every model enthusiast. The FLIP, and its cousin the PIGEON, are easy to build and fly. They can provide many hours of simple flying enjoyment.
The Pigeon Kit Features ... An Airfoil Shaped Balsa Wing Blank A Die-Cut Balsa Fuselage Die-Cut Tail Surfaces Balancing Clay Detailed Step-By-Step Plans	The Flip Kit Features ... An Airfoil Shaped Balsa Wing Blank A Die-Cut Balsa Fuselage Die-Cut Tail Surfaces Balancing Clay Detailed Step-By-Step Plans