LASER CUT! classic Rubber powered free flight kit with a 32" wingspan. Includes a 15 inch diameter balsa propeller blank and all necessary hardware to fly it either R.O.G (rise off ground) or R.O.W (rise off water).

A 59 inch wingspan R/C flying wing glider for hand launch, hi-start, or cliff soaring.

LASER CUT!

18" wingspan easy to adjust and a great flier.
Designed as a teaching vehicle for rubber powered modeling. Movable pylon makes it easy to learn how various adjustments interact

12 inch wingspan is a great beginners model.

A simple stick and tissue model designed by Dick Baxter for beginners. Easy to build and fly with a built in left circle.

LASER CUT!
13 inch wingspan balsa & tissue model made to fly

A popular 1931 parasol homebuilt. Great lines and very light construction make this model a nice flying peanut scale

10 inch wingspan Rise off Ground. A wonderful 1st plane.

An easy to build introductory plane for indoor or outdoor

LASER CUT!13 inch wingspan balsa & tissue model made to fly

A truly beautiful and delicate 1927 biplane. Every angle is a reminder of the romance of flight.

LASER CUT!13 inch wingspan balsa & tissue model made to fly

A unique French homebuilt with a diamond fuselage

LASER CUT!
A small quick building sport flying outdoor duration plane

LASER CUT!
An easy to build P30 outdoor duration plane

LASER CUT!
Rubber, CO2, or Electric power. Would make a great micro R/C plane.

LASER CUT!
A 25 inch wingspan mini-R/C version of the famous Goldberg Senior Falcon. Now updated with laser cut balsa and plywood parts.
This 25 inch version of the famous Carl Goldberg Senior Falcon is powered by a .02 glow motor. Designed for miniature radio systems, this is a high performance treat for the R/C modeler. wingspan: 25 inch area: 100 square inches weight: 10 ounces You might want a 2 or 3 channel radio and .02 glow power. This model is also suitable for CO2 or electric power.

LASER CUT!
16" wingspan. Designed for Embryo Endurance contests.
A straight forward model that flies very well and is a terrific second model

LASER CUT! 13 inch wingspan balsa & tissue model made to fly

An American homebuilt personal plane. This model was world champion in peanut scale 3 times.

LASER CUT!
13 inch wingspan balsa & tissue model made to fly

An English WWII trainer. This classic open cockpit plane has the feel of the era.

LASER CUT!
Can be built as a RC or a FF kit
using rubber or electric power.
Designed by Thayer Syme

LASER CUT!
A simple 14 inch wingspan model for beginning modelers. Can be built as a catapult glider, powered with a Jet-X 50, or a rapier engine. All sheet construction

LASER CUT!
An easy to build sheet balsa model of the famous aerobatic trainer. 15.25 inch wingspan profile kit.

LASER CUT!
An easy to build sheet balsa model of this WWII observation plane. 15.25 inch wingspan profile kit. Includes stars and bars decals to make an authentic replica.

LASER CUT!
The classic american private aircraft. An easy to build, all sheet balsa, profile rubber powered kit. Great for beginners!

LASER CUT!
An easy to build, all sheet balsa, profile rubber powered kit. Great for beginners.

Perfect beginner or park fly electric kit

A simple, stable 2 or 3 channel trainer that anyone can fly. You will also need two 2" wheels, 2 control rods, fuel tank, engine mount, covering materials, glue, motor and a 2 or 3 channel radio. Possible motors: Electric: Astro .05 Cobalt direct or gear drive Gas: .09 - .11 r/c

LASER CUT!
13 inch wingspan balsa & tissue model made to fly

Built in France, England, and Germany in the 1950's

LASER CUT! 
Designed by Bob Peck for Bostonian competition

LASER CUT!

A 24 inch wingspan old time cabin plane designed for rubber, but easily adapted to electric or CO2, Now Laser Cut for easier building.

Wonderful beginner kit. Flying wing model that is easy to build and fly.

LASER CUT! 13 inch wingspan balsa & tissue model made to fly

This clipped-wing Cub includes a beautiful cub decal. It seems everyone has flown a cub.

LASER CUT! 13 inch wingspan balsa & tissue model made to fly

A colorful Swedish experimental biplane. This plane is a more stable flier than most biplanes.

16" rotor span. Rubber powered helicopter with belt driven tail rotor. Pulleys and fittings are pre-built ready for assembly.

LASER CUT!
13 inch wingspan balsa & tissue model made to fly

This model held the world's record in peanut scale. Very clean straight lines make this model a good choice for someone new to scale modeling.

LASER CUT!13 inch wingspan balsa & tissue model made to fly

The famous American WWII fighter. This plane is the most remembered from WWII.

LASER CUT!
13 inch wingspan balsa & tissue model made to fly

The infamous Japanese WWII fighter. The round fuselage makes this a model for experienced builders.