Length: 31" Beam: 10"  for .21-.45 Nitro

The  "Challenger" Series Deep Vee’s are one of The easiest models you will ever build and race. simple to build, easy to tune, extremely stable, and maneuverable. It resembles many of today’s Off-Shore Racers and when painted as such, you will have a model them-selves well to rough water conditions, able to take a pounding to be proud of. Deep Vee’s like the Challenger Series lend and handle a good amount of wake.

Length: 43" Beam 14" for .65 - .80 Nitro Engines 

The  "Challenger" Series Deep Vee’s are one of The easiest models you will ever build and race. simple to build, easy to tune, extremely stable, and maneuverable. It resembles many of today’s Off-Shore Racers and when painted as such, you will have a model to be proud of. Deep Vee’s like the Challenger Series lend them-selves well to rough water conditions, able to take a pounding and handle a good amount of wake

LENGTH: 43" or 48"  BEAM: 14" ENGINES: .65 - .80 NITRIO or 23-25cc Gas

Ready-to-Run:   ZENOAH G-23 MARINE ENGINE 23CC / Futuba Radio System

The "Challenger" Series Deep Vee’s are one of The easiest models you will ever build and race. simple to build, easy to tune, extremely stable, and maneuverable. It resembles many of today’s Off-Shore Racers and when painted as such, you will have a model to be proud of. Deep Vee’s like the Challenger Series lend them-selves well to rough water conditions, able to take a pounding and handle a good amount of wake

Ready To Run - 43"Challenger Pro-23cc Stock watercooled  Zenoah engine with Aeromarine Mount, Collet & Throttle Bellcrank, Watercooled exhaust tuned pipe system, Futaba Junior Radio with 1-1/4scale steering servo, 1-std. servo for the throttle, White gelcoat

CHALLENGER .80-GAS (48")

Ready To Run - 48" Challenger Pro-23cc Stock watercooled  Zenoah engine with Aeromarine Mount, Collet & Throttle Bellcrank, Watercooled exhaust tuned pipe system, Futaba Junior Radio with 1-1/4scale steering servo, 1-std. servo for the throttle, White gelcoat

LENGTH:  50"  BEAM: 12 1/2" ENGINE: .80-1.0 NITRO or .23-30CC GAS

The 50" Apache has all the same features as its larger brother. Detail & Quality only Aeromarine can deliver. 2 driver cockpit, spacious interior, ready for any amount of "horses

Ready To Run - 50” Apache - 23cc Stock watercooled Zenoah engine with Aeromarine Mount, Collet & Throttle Bellcrank, Watercooled exhaust tuned pipe system, Futaba Junior Radio with 1-1/4scale steering servo, 1-std. servo for the throttle, White gelcoat

Length 56" Beam:15-1/2"  for 23-40cc Gas, .80- 1.0 Nitro or Twins

The Giant 56" Apache Deep Vee hulls are exactly as the name suggests - GIANT!  

Power them with anything from a single .90 glow engine to twins or gas engines, there is ample room inside to let your imagination run wild. They are fast and stable even in the very roughest of conditions. The Giant Apache hulls have all the features of the Challenger series.

Also available to order are custom ‘twin’ hardware kits and custom engine stringer installations to suit twins and large gas engines.

Length 57"  Beam: 13",    For .80-1.0 Nitro, 23-40cc Gas

Standard Spec’s:  Dry weight - 9 Lbs * Offset Rudder setup * Surface or Subsurface drive * Hand layed Polyester Fiberglass * 1/4 Aircraft Ply Stringers/Bulkhead & Transom * Factory Joined Hull & Deck

Scorpion .21 - Hull, Length - 32", Beam:", For .21/.45 Nitro engines 

The Scorpion series hulls are out and out competition racing mono’s. Their medium vee hull form and ultra aero-dynamic design guarantees blistering speed and agility while maintaining stability even in choppy conditions. The competition proven Scorpions pack a very powerful sting

They are simple to build and have all the usual Aeromarine features:  Factory joined hull and deck * Factory installed stringers and bulkheads * Fitted hatch * Full size plans and instructions * Super light weight * Available in three sizes * All hardware is available either individually or as a complete, tailor-made kit

Scorpion .45 - Hull, Length - 36", Beam:", For .45/.67 Nitro engines

Scorpion .50 - Hull, Length - 36", Beam:", For 23-35cc Gas Engines

Length 53" Beam: 18 1/2", For .80-1.0 Nitro, 23-35cc Gas

Jersy Skiff, "The East Coasts answer to the Cracker Box" The name says it all, a high-speed scale model of the popular racing craft that has been spotted on the racing scene from Main to Florida, and all points between. The model features factory joined hull and deck, lapped staked sides like it full size counterpart, 2 bulkheads and a center hatch (rear cockpit available

Length 43"  Beam:13",  For .80-1.0 Nitro, 23-25cc Gas, w/ Clear canopy

The Stingray 43 is a modification of our all popular and high performance Deep Vee, the Challenger. All the same handling, all the same speed, different deck and cowl for an ultra scale look. Available with clear canopies or canopies molded in fiberglass. Completely conceals a Zenoah. Throw it under your arm and off to the lake!

Length: 28.5" Beam: 10.25" for .21 Nitro

The Titan .21 is proving to be a real top competitor at the lake ! New deeper angle short strake design makes this hull extremely stable, even at high speeds.  Add the new OPS .21 Supermarine and have a top notch racing machine!

Length: 33.5" Beam 10.25" for .40 - .67 Nitro

The Titan .40 offers deeper angle vee short strakes and full offshore look. All the standard Aeromarine features, factory joined hull and deck, aircraft birch stringers installed, top quality polyester fiberglass layup.  All this and it is already highly competitive at the races!

Donzi 49 inch

The new Aeromarine Team Donzi 49” hull mimics its full size Super Vee, just one of Donzi Marines fleet of quality Race and Pleasure boats. This hull, offering all out speed and performance, even in the roughest conditions, is sure to be a crowd pleaser. Models available Ready to Run (painted and not painted), Kit form or hull only.

Features you will find in Aeromarine Hulls include:

• Factory-Joined Hull & Deck
• Comprehensive Plans
• Race Proven Hull Design
• Fitted Hatch
• Easy-to-Build
• Aircraft Ply Stringers

Ready to Run - Complete. Built with Stock G-260 Zenoah, FM Radio w/ 1-High torque servo for steering, Water cooled tuned pipe, header and flange, All high performance Aeromarine Hardware (no upgrades needed!), 24 oz. Fuel Tank, Floatation, all perfectly assembled the way it should be done. Just add Gas

Length 29" Beam:11" For .21/45 Nitro engines

Ever since their inception in the early 80’s our Sprint Series Catamarans have totally revolutionized competition racing. Astounding agility make this style hull the most sought afterby the "drivers" of the sport. Their ability to hug the buoys makes it nearly impossible for any other style hull to slip by. Their original sharp sponson design make this hull turn on rails and the correct tunnel width allows this hull just enough lift, without flying backward down the straight. If you want all out performance, this is it!

Length 36" Beam:14" For .40/.80 Nitro engines

Ever since their inception in the early 80’s our Sprint Series Catamarans have totally revolutionized competition racing. Astounding agility make this style hull the most sought after by the "drivers" of the sport. Their ability to hug the buoys makes it nearly impossible for any other style hull to slip by. Their original sharp sponson design make this hull turn on rails and the correct tunnel width allows this hull just enough lift, without flying backward down the straight. If you want all out performance, this is it!

Length 42" Beam:15" For .80/.90 Nitro engines

ver since their inception in the early 80’s our Sprint Series Catamarans have totally revolutionized competition racing. Astounding agility make this style hull the most sought after by the "drivers" of the sport. Their ability to hug the buoys makes it nearly impossible for any other style hull to slip by. Their original sharp sponson design make this hull turn on rails and the correct tunnel width allows this hull just enough lift, without flying backward down the straight. If you want all out performance, this is it!