Quick Tech Hobby Over 75,000 Radio Control Products

CEN9501 GENESIS 46 RTR   ***  CEN9502  GENESIS 46 ARR

 

Manual      Action Shot     Movie   

Genesis 46 (9501) / Genesis 46 LE (9504) Spec
1/8 Ready To Tock Monster Truck

Length: 23.1in. (587mm)
Width: 18.4in. (467mm)
Wheelbase: 15.63in. (397mm)
Weight: 17 lbs (272oz, 7.7kg)
Ground Clearance: 4 in. (111.8mm)
Suspension Travel: 4.4in & 5inch (w/o Top Shocks)
Tire Size: 7.5in. (190.5mm)
Wheel Size: 5.2in. (132.1mm)
Fuel Tank Capacity: 220cc
Run Time: approximately 15 min

  Upgrades   Replacements


NX 76 Engine
Displacement: .46ci
Ports: 3
Rear Exhaust
Starter Type: Pull Starter
Carburetor: 2 needle slide
Crankshaft: SG shaft
Piston / sleeve: ABC
Red-anodized cooling head
Horsepower: 5.0hp @ 23,000rpm

   CEN's new GENESIS 46 monster truck will revolutionize and change the way we all look at Remote Control Monster Trucks. The GENESIS will dominate its competition by delivering unbelievable power with a .46 engine. When it comes to durability the CEN GENESIS 46 lives up to its name. It is equipped with a hardened steel three-speed transmission, along with hardened steel spur gears. The dual vertical chassis (DVC) provides a super rigid truck that will climb over its competition.
   The CEN GENESIS 46 comes with an engine that is in a league of its own with 5.0 Horse Power!!!! This engine is specifically designed and engineered with the monster truck in mind. There is nothing quite like having the massive CEN GENESIS 46 at your fingertips!!! CEN Racing, Empower Yourself!!!!!



Aluminum tranny case with 6 gear differential
The GENESIS now comes with a super strong Aluminum differential case that houses the ultra strong 6-gear differential. This is by far the strongest differential system ever developed in the industry.
20cc Fuel Tank
GENESIS comes with a huge 220cc fuel tank. Tank has a stone fuel pick up and O ring seal on the Cap. Less refueling and more Driving!


Dimension X Coil-Over System
The GENESIS comes with a unique Dimension X suspension. This gives the truck superb handling in all conditions. The tenability of the Dimension X suspension is endless. You can set your Genesis up for Rock climbing or Track racing.
Sealed Radio Compartment
The GENESIS has a sealed Radio compartment that eliminates substances like dirt, dust, water, and oil from coming in contact with your receiver.


Vented Clutch System
No other monster truck matches the clutch system included with the GENESIS 46; it is a four-shoe system with ultra stiff springs. This ensures superb power when needed. The clutch bell has cooling vents to prevent the clutch from over heating
Forward / Reverse / 3-Speed
The GENESIS is equipped with forward and reverse technology. With a simple switch of a button you can drive your GENESIS is reverse. You will experience three speeds forward and reverse at the flip of a button!


Safeguard
On-board electric failsafe is standard on all Genesis.
8mm CVS
Huge heavy duty CVS (constant velocity shafts) are included. These shafts allow for better handling through bumps and best of all are super heavy duty. Made of harden steel.
  • Fully READY TO ROCK (RTR)

  • Trimmed, Painted and Decocrated Body

  • Dual Vertical Chassis design (DVC)

  • Shaft Driven 4 wheel Drive

  • High Impact skidplate bumpers (Front and Rear)

  • 10 Fully Functional Reservoirs

  • 4.4 inch Suspension Travel, 5inch (w/o Top shocks)

  • Stiff hard coated "RED" spring

  • Hard anodized counter sunk chassis plates

  • 4 Disk Caliper Brake system

  • Safeguard - Onboard Electrinical Failsafe

  • Full Precision Ball Bearings

  • Fully equipped with Allen Hex Screws

  • Carry handle with rubber Grips

  • "Dimension X" 10 coilover system

  • Hardened Steel 8mm (5/16inch) thick CVS (Constant Velocity Shafts)

  • LSD (Limited Slip Differential) type Front, Center, and Rear differential

  • Protected Radio Box and Battery case

  • 3-Speed Automatic Forward/ Reverse Transmission with adjustable shifting

  • Machined 1 piece motor mount with built in cooling fins

  • Heavy Duty Spindle and caster blocks with Alloy wheel hexes

  • Alloy Hinge Pin Supports

  • Transmitter Controlled Reverse