Catalog | Manual | Spec Sheet | Parts List | Option Parts | Building Tips | Racing Tips | Proceed FAQ Forum

The Proceed is the first 1/8 scale racing kit from HPI Racing. For serious racers looking for the ultimate in speed and tuning capability, look no further! This is the kit to have.

Capable of 0-60 in less than 3 seconds on the way to a top speed in excess of 70 mph, the Proceed is not for the faint of heart! This is a kit for the truly hard-core racer who wants to experience the most demanding on-road R/C racing experience. With A final races routinely an hour long at most club events, 1/8 scale on-road racing is a very rigorous and exacting hobby!

These are pictures of the production version of the new HPI Proceed, our car that will compete against the likes of the Serpent Vector, Picco Integra and Mugen Avance/MRX cars! The 1/8th scale racing class has long been considered the "Formula 1 of R/C racing", and with cars like the Proceed, it's very easy to see why! This is a very serious racing car, easily capable of speeds in excess of 70mph.

The Proceed features a 5mm thick 7075S aluminum chassis, 2.5mm thick woven graphite radio deck (this is optional on other 1/8 scale cars), quick-change front and rear wheels, double wishbone suspension, dual kingpin pivot balls for the front and rear uprights, adjustable front swaybar, thick steel brake disk with fiber disk pads, and threaded shock bodies for quick ride height adjustment.

Measurements (of prototype car):
Total length (without body): 442mm
Total width: 262mm
Wheelbase: 300mm
Main Chassis: 5mm 7075S anodized aluminum, front end is angle-cut
Upper Deck/Radio Plate: 2.5mm woven carbon graphite (standard)

Drive Train:
Triple belt 4WD system, middle belt has bearing belt tensioner
Solid rear axle
Front one-way diff

Engine:
Available without engine only (requires a .21 size rear-exhaust engine)
Two speed transmission standard (features dual clutch shoes)

Clutch:
Innovative new flywheel system

Other features:
Full ball bearings throughout the car, center mounted steering servo with turnbuckle toe-in adjustment and a heavy-duty servo saver, balanced radio plate design with a center-mounted receiver pack, center-mounted fuel tank with built-in fuel baffles to prevent fuel foaming, sliding-type adjustable front swaybar, thick rear sway bar, floating rear body mount, easy shock mounting system with Allen screws and pivot pins, no e-clip pivot joints for all suspension hingepins, adjustable front caster with easy to use clips, and new six-spoke wheels with easy access to suspension adjustment screws!

The Proceed will be a major factor in the ultra-competitive field of 1/8th scale racing, and many drivers across the world are anxiously awaiting this car! Our regular distribution chain will be ordering the Proceed, so parts support will be good. We've already had a great response just from word of mouth passing from racer to racer, and we know racers will want to check out this new contender!

The Proceed kit is only available without engine, and is competitively priced with the best of the current 1/8th cars.

See our kit video! | Proceed Catalog Page | See our Customer's Proceeds