MA010 AWD RTR

MA-010 AWD RTR

AWD plus 4-wheel independent suspension marks a new chapter in Mini-Z history! If there is a real AWD vehicle out there, you can expect it to appear as a Mini-Z AWD. Of course, the Mini-Z AWD (All Wheel Drive) chassis maintains its high performance and sophisticated technology, as well as the incredible attention to detail. The Mini-Z also manages to achieve its shaft-driven AWD system in its minimal size with a precision king-pin strut system 4-wheel independent suspension. In addition, the high efficiency drive system features a specially shaped crown gear and pinion gear in the newly designed diff gear unit. The result is a level of resistance through the drive train about the same as existing 2WD versions to produce true racing machine performance. And the focus on weight throughout means the AWD is not much heavier than the 2WD version. However, the AWD features a high-power speed control amp with 30% more capacity than the existing 2WD chassis to bring out the best performance from the new chassis. You won't believe that so much power and performance can come from a machine so small! And the level of detail is as high as ever with a variety of body styles that match the 65mm minimum width of the chassis beautifully. The design also allows increased freedom in setting adjustments such as toe angles with optional parts. If your hungry for the excitement of high performance racing technology, the new "AWD chassis" puts you right at the front of the starting grid in the world of micro racing!
MA-010 AWD Nissan Skyline GT-R 34 Green	MA-010 AWD Nissan Skyline GT-R 34 White	MA-010 AWD R/S Lancia Delta HF Red
MA-010 AWD Nissan Skyline GT-R R32 Jet Silver Metal	MA-010 AWD Nissan Skyline GT-R R32 Red Pearl Metal	MA-010 AWD R/S Impreza WRX STI White
MA-010 AWD R/S Lancia Delta HF Integrale White	MA-010 AWD R/S Lancia Delat HF Yellow

ReadySet Contents

	Factory assembled chassis with installed R/C Unit
	Painted plastic body complete with markings
	Wheel-type transmitter
	Pinion Gear 4-types, Spur Gear 3-types (combines for 3 different wheelbase settings)
	Chassis height adjustment collars
	Pinion Gear Tool
	Spare Nuts
	Wheel Wrench
*	AA-sized batteries X 8 for transmitter, AAA-sized batteries (alkaline or Ni-MH) X 4 for chassis are sold separately


Midship motor mount with shaft driven AWD for optimal balance.	4-wheel independent suspension with king-pin strut system realizes excellent running stability & performance.


Factory assembled chassis comes with R/C unit installed and features new "RA-12" receiver unit with built-in speed control amp with 30% more capacity.	Equipped with precision manufactured universal swing shafts on all wheels to communicate drive power with maximum efficiency and allow smooth movement of suspension system.


All Wheel Drive system features diff gear unit with precision 3-bevel gears and specially shaped cogs on crown and pinion gears.

One-touch removal/attachment of optional tie-rods allow easy adjustment of toe angle.

	Factory finished body is complete with coloring and decals.
	Drive energy is transferred to the ground through high strength resin universal swing shafts with metal core.
	Equipped with 4 precision ball bearings for high drive efficiency.
	Includes 4 types of pinion gear and 3 types of spur gear for a wide range of gear ratio settings.
	Includes collars that enable chassis height to be adjusted to low down setting.
	Bump stop fitted to front to regulate suspension stroke and prevent tire and body contact.
	Micro-edge precision finish to 1/100mm.
	Easy-access diff unit can be removed/installed by simply loosening 4 screws on the front and 6 on the rear.
	AWD lets you enjoy a controlled driving posture as you drift through turns.
	Only 5g heavier than the MR-02 chassis series but features AWD and 4-wheel independent suspension.
	Chassis design allows minimum width of 65mm so most body styles for MR-01 and MR-015 chassis can be used.
	Wheelbase can be easily adjusted to the Mini-Z Racer M and L sizes so you can use those exquisite Mini-Z bodies you already own. (Some body shapes are not able to be used).

<Regarding interchangeability between the Mini-Z AWD & Mini-Z Racer>
	Regarding body fitting, the Mini-Z AWD shares the same dimensions as the MR-015. Therefore, the bodies that fit the MR-01 and MR-015 and their M and L-sized wheelbases can be used on the AWD.
	The Mini-Z AWD uses specially designed wheels. These cannot be interchanged with the Mini-Z Racer wheels. Please choose from the wheels included in the AWD chassis set.
	The wheels currently available with Auto Scale Collection are not suitable for the Mini-Z AWD. Please choose from the wheels included in the AWD chassis set.
	The wiring on the motor used in the Mini-Z AWD is different to motors used in the current Mini-Z Racer Series up until now. Please use the AWD motor set.

Chassis Technical data
Length	127.5mm(M),131.5mm(M)
Width	65～72mm (67mm)
Height	43mm
Ground Clearance	4mm
Wheelbase	90mm(M)、94mm(L)
Tread (F & R)	56.5~63.5mm/56.5~61mm (F & R 58.5mm)
Tires (F / R)	Φ 25×8.5mm2 pcs/Φ 25 x 11mm2 pcs (Φ 25×8.5mm4 pcs)
Gear Ratio	7,2/6.4/6.0/5.7/5.3/5.0/4.5 : 1
Weight	135g (approx.)
Motor	130-Class