|
 The
TXT-1 is designed like a full size monster truck with an aluminum ladder
frame and multi-link suspension. Solid axles with a cantilever system
allows for massive suspension articulation. This kit includes hardware and
a second servo saver for four wheel steering. The servo (or servos) are
located next to the axle for direct steering. Kit requires a 2 or 3
channel radio and can operate on a 7.2V or 8.4V battery.
Feel the Power of Twin Motor 4WD!
This R/C machine packs all the
power of an American Monster Truck. Tamiya invites you to feel the rumble
of parallel twin motors transferring power to the propeller shaft and
front/rear axles as this bad-boy takes on extreme 4x4 off-road action.
Heavy-duty Parts for Rugged
Driving
Aluminum side frames and
suspension arms add a customized feel and ensure high durability. The
TXT-1 features a 2-level gearbox for efficient power transmission.
The 4-link rigid wheels
feature push rods and locking arms as well as dampers that employ
cantilever suspension. The extraordinary suspension stroke and monster
tires allow the TXT-1 to handle the hardest of roads
This gargantuan R/C truck has
a total length of 510mm and a total width of 385mm. The model emulates the
crushing power demonstrated by real-sized American monster tucks as they
pound their way over rows of junkyard cars. This unique colossus needs no
roads, simply grab the transmitter and watch as the TXT-1 paves a path of
its own.
See the powerful TXT-1 in
action!
Now you can check out the
TXT-1's hardcore off-road performance with just the click of your mouse.
The TXT-1's sheer power lets it tackle the harshest terrain- no roads, no
problem. But don't just take our word for it, click on the link below to
check it out!
 Download
Video
240x180 pixel approx. 16seconds (1.1MB)
*Approx. 4min. to download with 64K modem
- Overall length: 510mm, Overall width: 385mm,
Overall height: 297mm
- Minimum clearance: 49mm
- Weight fully equipped: 5,010g (including
TP-S3003 servo x 2, TP-R122JE receiver, and RC2400SP battery)
- Wheel base: 330mm
- Tread (front and rear): 280mm
- Chassis material: aluminum
- Chassis type: ladder frame
- Steering tie rods: divided in two segments
- Suspension (front and rear): 4-link rigid
- Caster angle (f/r): 0 deg.
- Camber angle (f/r): 0 deg.
- Toe angle (f/r): 0 deg.
- Dampers (f/r): CVA damper
- Drive train: shaft drive 4WD
- Gear ratio: 34:1
- (2) type 540 motors
- Diff gear system (f/r): 3 bevel diff
- Speed controller: 3-step speed controller
- Tire width (f/r): 106mm
- Tire diameter (f/r): 165mm
- Tire pattern (f/r): Lug pattern
Required Items (Sold
Separately)
- R/C Unit: Adspec GT-II or 2 channel 2
servo-type transmitter
- Battery: Tamiya 7.2V battery
- Receiver batteries: (4) R6/AA/UM3
- Transmitter batteries: (8) R6/AA/UM3
|
)
)
)
)
)