|
|
The new EB-4 S3 is the culminating
result from extensive engineering and tremendous research and development
by the Thunder Tiger Design Team.
Specification:
Length: 496mm / 19.5 in.
Width: 305mm / 12 in.
Height: 180mm / 7.08 in.
Wheelbase: 320mm ~ 330mm
FR/RR Track: 295mm ~ 305mm/300mm
Weight: 3340 g. / 7.4 lbs. |
Innovative
engineering enabled the low center of gravity. Combine with high
performance suspension to create transition on any track. Along with the
help of a manual with computer generated drawings and helpful pro tips;
you will have no problem assembling this masterpiece. Leap into the future
of the 1:8 scale racing.
Introducing features such as an extruded chassis; the most rigid ever,
shocks that are placed in between the upper arms; keeping the shocks away
from front damage in case of crash, single fiber discs at the front and
rear of the center differential, oversized shock shafts match the current
3.5mm-thick shafts used on the best buggies in the market. Achieving the
super low center of gravity, and a new radical engineering of a car
construction. |
|
Features
- A7075-T6 front/rear shock tower and steering
slider
- Front A-arm with adjustable Pillow-Ball
suspension
- AB (Anti-Bumping) shocks with 3.5mm shafts
provide various damping and rebounding
- Ultra long, light weight suspension arms
- Small transmission bulkheads with gasket
- Front shocks are protected behind the shock
tower and mounted through the upper A-arm
- Graphite front brace, radio tray and center
diff top plate
- Unique Delta-Box machined hardened chassis
provides more rigidity than a conventional stamped chassis
- Heavy duty CVD universal drive trains
(Front/Center/Rear)
- Enclosed radio box protects receiver and
batteries from any foreign elements
- Laid down steering servo for low center of
gravity
- Complete set of rubber-sealed ball bearings
- Fully adjustable Toe, Caster and Ackerman
- Captured hinge pins no E CLIPS needed,also
prevents binding of suspension components
|
Required
- Radio Set
- 2 Channel radio, x2 High Torque servos, Receiver and battery pack.
- Engine - .21
rear exhaust engine, Glow Fuel (20%), Glow starter, Air filter oil.
- Adhesives -
Instant setting Cyanoacrylate adhesive (thin CA), Threat locking glue.
- Tools - Hobby
knife and blades, Fine-point or felt-tip pen, Small phillips and flat
head screw drivers,
Wire cutter, Needle nose pliers, Lexan cutter/Scissors, Silicon oil.
|
