*FR12 Side Exhaust  ROTARY CARB W/O PS  $248.99  

FR15 Side Exhaust ROTARY CAR P/S $279.99

*FR21 RACE ENG RR EXH W/PS $309.99

FR21PS - .21 High Performance Race Engine w/ Pull Start

• New Rear Plate - HPI Rotostart and Other rotostart systems bolt right on, and also features a new hi-performance starter shaft bushing
• New Crankshaft Timing Specs - Increased performance throughout powerband with greatly improved low-end response
• New Piston & Sleeve Porting and Timing Specs - Matched to the new crankshaft for incredible power and RPM
• New Head Shim Specs
• New Deck Height Specs
• Improved Internal Crankcase Porting - For better flow to intake ports
• Improved Crankcase Machining at Carb Intake - For better flow from carb to crank intake
• New Turbo Head Buttons (optional standard head buttons are available: part# FAN10439 for FR21 and part# FAN10441 for FR27)
• New High-Performance Glow Plugs:

*FR27 RACE ENG RR EXH W/O PS $309.99

FR27 - .27 High Performance Race Engine

*STOCK MOTOR TEAM EDITION MINT

Team Edition 24-degree Rebuildable Stock Motor (Mint - 2 Magnet)

Team Edition motors include our high performance brushes and springs installed, and then the motor is tuned and tweaked on our Facts Machine dyno, and must meet our stringent specifications before it can be sold as a Fantom Team Edition stock motor. All Team Edition motors include a dyno printout.

*STOCK MOTOR LTD TEAM EDITION

*19 X 1 TEAM QUAD MAG SPEC MWM

*19 X 1 LMTD TEAM QUAD MAG MWM

*19 X 1 SPEC MOD MOTOR TEAM ED

MICRO MOD RACING MOTOR

Mini-Mod Micro Modified Racing Motor

Micro mania is here and Fantom has the hottest new modified motor to fill your need for speed. Joining Fantom's arsenal of modified motors is our latest creation, the Fantom Mini-Mod. This micro-modified racing motor was designed specifically for the latest micro-sized vehicles, such as the Mini-T, M18, and Micro RS4. Don't expect anything mild here, because this one was designed for all out performance. You won't believe the features that are packed into this little missile, not to mention the performance gains you will get out of your micro car or truck.

• Wild Wind for Superior Acceleration & Top End Speed
• Ball Bearings
• Replaceable High-Performance Brushes & Springs
• Pre-Installed Capacitor
• 2 Mounting Hole Options to fit nearly any Micro Car or Truck

*9 X 1 VORTEC MOD MOTOR $95.99

FANTOM VORTEC FACTORY MODIFIED MOTORS

Features include:
*CNC Machined Endbell- This is the most advanced modified motor racing techology available on the market. Precision machined from billet aluminum, these motors yield superior cooling efficiency and fit over plastic endbells, which results in increased longevity of all components. Increased cooling also maximizes motor performance.

*Hand-wound Armature- These professional-level armatures are the finest available in the world, featuring 25 years of experience built into every one. All armatures feature pattern hand-wound Team winds with race specific wire gauges, state-of-the-art welds and epoxy coating, precision epoxy balancing and diamond trued comms.

*Pure Copper Brush Tubes- Produces super low resistance, precise brush fit and superior brush stability.

*Angled and Round Brushes- The angle reduces brush bounce and increases the contact area, while the round brush design results in smoother brush overlap, both producing less arcing and longer brush and commutator life. Less arcing and brush bounce maximizes motor performance and decreases the chance of radio interference. Brushes and comms last up to 12 times longer.

*Anti-Vibration Ball Bearing System- Endbell bearing is installed against an o-ring, virtually eliminating any bearing produced vibration, further reducing the possibility of brush bounce and arcing. Motors run super smooth.

*Inboard Capacitors- Means no soldering of external capacitors is required. The circuit board capacitor technology is mounted inside the endbell for protection and a clean look.

*LED Enhancement- Mounted on the capacitor circuit board, this small LED verifies that capacitors are working and ESC wires are connected with the proper polarity. The LED also allows for easy viewing of the commutator, while the motor is running.

*Airflow Vents- Special vents are machined into endbell to increase cooling further and work in conjunction with the vented can for maximum cooling efficiency.

*2 Magnet Can- Still proven to be the best magnet configuration. The motor can features state-of-the-art high-power magnets for ultimate performance.

*Special Euro, Ralph Burch and Jesse Robbers Editions- Euro (12 x 1 & 12 x 2) and Ralph Burch (10 x 1) feature special ground armature stacks and wire sizes specifically developed for classes and racing organizations imposing wind limitations. These special features maximize the full RPM and horsepower potential of these specific wind motors. Other Ralph Burch and Jesse Robbers Edition motors feature these two National Champions favorite winds and motor set-ups.

*Race Specific Winds and Motor Set-Ups- Every motor and armature is built for a specific type of racing. Vortec motors are available for off-road, on-road, 1/12th and oval applications.

*Performance Brush Compounds- Three compounds are available to maximized performance in any racing situation.

*Performance Brush Spring Tensions- Four spring tensions are available for increased tuning capabilities in any racing situation.

*Worldwide Approval- Meets ROAR, EFRA, IFMAR, BRCA and JMRCA specifications