1100 DEG F 40W Ceramic Iron

Hakko 455-456 Soldering Irons The HAKKO 455 and 456 soldering irons incorporate a ceramic heater. They heat up to 1110°F, proving the wattage of a soldering iron is NOT indicative of its thermal ability.

Powerful soldering irons that heat up to 1110°F.

• ceramic heating element for longer service life than normal conventional nichrome-iron (NiCr) element

• alloy-coated iron tips ensure long-lasting protection from corrosion

• the 455 is perfect for soldering tuners, inverters, and similar small components.

• the 456 is an excellent iron for soldering chassis, dynamos, large harnesses, transformers, large components and assemblies and stained glass panels and lead came.

With a ceramic heater, wattage has nothing to do with the soldering irons heating capacity

*860 DEG F 60W WIRE WOUND IRON

The HAKKO red iron is an economical and lightweight soldering iron. Ideal for students and hobbyists.

Economical and lightweight design makes these irons ideal for students, hobbyists, and repairing those electric household appliances.

• use the 40W for circuit boards, small electric parts, etc.

• use the 60W for connectors and heavier wiring connections

*REPLACEMENT TIP CLEANER

Cleaning wire for the 599B, 601. Made from coils of brass. Cleans the soldering iron tip without water!

*TIP CLEANER

The HAKKO 599B tip cleaner is made from coils of brass. It cleans without water! Simply plunge (stab) the iron tip into the coils to clean the tip. The wire is softer than the tip plating yet harder than the oxidation that forms on the tip. It will not reduce the tip temperature. A great alternative to the conventional damp sponge. May be used as a portable tool holder and cleaner Replaceable cartridge for the 601 iron holder.

*IRON STAND

The HAKKO 602 iron holder is compatible with the following HAKKO irons: N452, N453, N454 (Dash) 918, 920, 921, 922 (Mach-I) 455, 456.

*PKG COVER IRON 605

The HAKKO 605M soldering iron Hot Sock offers superior heat resistance and thermal insulation while protecting the iron. The soldering iron can be placed back into the toolbox immediately after your soldering work is complete. A very handy and smart accessory. Compatible with the following HAKKO irons: N452, N453, N454, 918, 920, 921, 922, 455.

*601 IRON HOLDER W/TIP CLEANER

Iron holder with 599B tip cleaner. Compatible with the Hakko Dash (N452, N452, N454) Mach (918, 920, 921, 922) and 455-456 irons and 808 desoldering gun

*601 IRON HOLDER W/SPONGE

Iron holder with sponge and tray. Compatible with the Hakko Dash (N452, N452, N454) Mach (918, 920, 921, 922) and 455-456 irons and 808 desoldering gun.

"*TIP 1.6D,900L/908/914 "

900L-T-1.6D

Shape: Chisel Size: Large Fits 900L, 908, 914 irons For Models 926, 927, 928, 936, 937, 702, 703, 703B

"*TIP 2.4D, 900L/908/914 "

900L-T-2.4D

Shape: Chisel Size: Large Fits 900L, 908, 914 irons For Models 926, 927, 928, 936, 937, 702, 703, 703B

"*TIP 2CF,900L/908/914 "

900L-T-2CF

Shape: Bevel Size: Large Fits 900L, 908, 914 irons For Models 926, 927, 928, 936, 937, 702, 703, 703B NOTE: Tinned on bevel face only

*3.2MM CHISEL TIP FOR # 93610

900L-T-3.2D

Shape: Chisel Size: Large Fits 900L, 908, 914 irons For Models 926, 927, 928, 936, 937, 702, 703, 703B

"*TIP 5C, 900L/908/914 "

900L-T-5C

Shape: Bevel Size: Large Fits 900L, 908, 914 irons For Models 926, 927, 928, 936, 937, 702, 703, 703B

*TIP FOR # 900L/908/914

900L-T-B

Shape: Conical Size: Large Fits 900L, 908, 914 irons For Models 926, 927, 928, 936, 937, 702, 703, 703B

*5.6MM TIP FOR 900L/908/93610

900L-T-S1

Shape: Chisel Size: Large Fits 900L, 908, 914 irons Use with 926, 927, 928, 936, 937, 702, 703, 703B

*TIP 1C FOR # 900M/907/913

900M-T-1C

Shape: Bevel Size: Medium Fits 900M, 907, 913 irons Use with 926, 927, 928, 936, 937, 702, 703, 703B

*3.2MM TIP FOR # 900M/907/913

900M-T-R

Shape: Slot Size: Medium Fits 900M, 907, 913 irons Use with 926, 927, 928, 936, 937, 702, 703, 703B

*TIP 13/64IN D 900M/907/913

900M-T-S3

Shape: Chisel Size: Medium Fits 900M, 907, 913 irons Use with 926, 927, 928, 936, 937, 702, 703, 703B

*907 TO 908 CONVERSION KIT

The Hakko 908-CK Conversion Kit converts any Hakko 907 Soldering Iron that uses medium mass (900M) tips into a Hakko 908 Soldering Iron that uses large mass (900L) tips.

Conversion Kit comes with:

• 900L-T-3.2D Large Mass Tip
• B1787 Enclosure
• B1794 Enclosure Nut
• B2033 Nipple

*800 DEG F 85W CERAMIC IRON

The Mach-1 iron series offer faster heat transmission for faster heating. This means faster start-up as well as faster thermal recovery during high volume soldering operations

The Mach-1 series offer faster heat transmission for faster heating. This means faster start-up as well as faster thermal recovery during high volume soldering operations.

Faster thermal recovery also permits lower tip temperatures, which reduces the possibility of damage to boards and components; prevents seizing; and reduces the temperature of the handles and extends tip life.

The ideal soldering temperature is maintained constantly for perfect results every time. The highly insulated ceramic heater prevents overheating, which can damage IC boards. An insulation factor of over 100 ohm can be maintained even during actual use.

Temperature control sensor is built into the heating element for faster, more stable temperature control.

Compact lightweight design with high cooling efficiency at the handle permits fatigue-free soldering over long periods for maximum work efficiency.

*SOLDER STATION ESD ADJ TEMP

The 936 ESD soldering station is an inexpensive, temperature adjustable station that you can stack to conserve valuable bench space.

The 936 soldering station is an inexpensive, compact station that you can stack to conserve valuable bench space.

Features include:

• adjustable temperature control with lock/set screw

• temperature range 392°-896°F (200°- 480°C)

• maintains idle temperature within 1.8°F (1°C)

• ceramic heating element and senor insures rapid heat-up temperature (30 seconds) and lightning-fast thermal recovery

• Celsius or Fahrenheit temperature setting

• temperature adjusted by simply turning the dial

• slender iron handles are insulated and ergonomic-designed for ease and comfort

• accommodates large, medium or small irons

• wide selection of tips available for soldering SMD and through-hole connections

*REPLACEMENT SPONGE FOR 936 IR

Cleaning sponge for the 936, 937, 631, 632, C1141, C1142

*5MM CHISEL TIP FOR # 45516P

A1052

Shape: SD, Special For 455 Iron

*HEATER (900L/M)/907/908

*ENCLOSURE TIP 908/900L/N454/9

"*NUT, ENCLOSURE,908/900L/N454/"

*HANDLE W/GRIP FOR 907 IRON

*HANDLE W/GRIP FOR 908 IRON

*NIPPLE FOR # 908/908-ESD/914

*IRON HOLDER 936/937/907/908/9

Iron holder for 907, 907 ESD, 908, 908 ESD, 913, 914.

"*IRON, MEDIUM,907,936 "

"*LARGE IRON FOR 908,936 WHITE "

This iron is a large, heavy-duty iron that is used with the HAKKO 936 and 937 soldering stations.

"*IRON, LARGE 908-ESD,936/937/7"

This iron is a large, heavy-duty iron that is used with the HAKKO 936 and 937 soldering stations.

*6MM TIP FOR # 503FV12EDP  Shape: Chisel (6mm)
For Models 503,915

*850 DEG F 25W CERAMIC IRON

These irons offer a compact, lightweight design with a slender handle for a comfortable grip and incorporate a rod-type ceramic heater, which provides high insulation and reduces the handle-to-tip distance for faster soldering with a minimum of motion.

These irons offer a compact, lightweight design with a slender handle for a comfortable grip.

Rod-type ceramic heater provides high insulation and reduces the handle-to-tip distance for faster soldering with a minimum of motion. The special alloy heating element is printed in the alumina ceramic insulating layer, then sintered to the ceramic main body, completely sealing the heating element from the air, protecting it from oxidation.

You will enjoy years of trouble-free use with these soldering irons.

*TIP 4C FOR # 900L/908/914

900L-T-4C

Shape: Bevel Size: Large Fits 900L, 908, 914 irons For Models 926, 927, 928, 936, 937, 702, 703, 703B

*3.2MM CHISEL TIP FOR P918MV12

918-T-3.2D

Shape: Chisel For Mach-I Iron (Model 918)

*6.5MM CHISEL TIP FOR P918MV12

918-T-6.5D

Shape: Chisel For Mach-I Iron (Model

*CONICAL TIP FOR # PN454JNV12

N452-T-B

Shape: Conical For Dash Iron (Models N452, N453