NameThe FPE 1.3 rises piston and sleeve above other engines of the same size. Not only does the 1.3 provide over 10 pounds of thrust, but it does so with less weight and a smaller footprint than comparable engines. Due to its smaller footprint, you'll find a wealth of airplanes suitable for the FPE 1.3, including SIG's new Rascal 110 ARF. With an included linear throttle arm set up, installation is a breeze.

Like all First Place Engines, the FPE 1.3 comes with an electronic ignition system, insuring a definite spark and a surer start time after time. A sound reducing, power enhancing Pitts style muffler is also included to make this even a better value. Bore 1.268 inches (32.2mm) Stroke 1.024 inches (26.0mm) Displacement 1.3 cubic inches (21.3cc) Weight w/muffler 40 ounces (1.13kg) RPM range 2,800 to 7,400 RPM Thrust 10 lbs @ 7,400 RPM Fuel Regular Unleaded Gasoline w/50:1 oil mix Recommended Prop 16x8 

1.3 ENG w/Smoke Muffler

Each F.P.E. engine comes with its own ultra light weight TIG welded custom aluminum muffler, which is smoke system capable out of the box. All four F.P.E. engines come with high quality electronic ignitions, complete instructions and a full one year warranty. These engines burn common gasoline, mixed with oil at a 50:1 ratio.

Of special interest, is the new 2.4 c.i. F.P.E. engine. This small gasoline engine weighs only 48 ounces, INCLUDING the muffler and electronic ignition! The 2.4 was designed especially for the new large scale 1.20 - 1.50 ARF models, such as the great SIG CAP 231EX and the new SIG EXTRA 300XS, as well as similar sized models from other manufacturers. This engine, using a 20 x 10 propeller, provides a staggering 18 pounds of thrust at just 6800 rpm! This means that airplanes in the 10 - 13 pound range will no longer be vertically challenged Cu. Inch F.P.E. 2.4 C.C. 40. Weight 3lbs (48oz) Propeller 20x10 Bolly RPM 6800 Thrust 18 Pounds

3.2 The F.P.E. engine line consists of four of the most beautiful, light weight and powerful gasoline powerplants that the industry has ever seen. These engines are designed specifically for large R/C aircraft and offer huge power to weight ratios. Cu. Inch F.P.E. 3.2 C.C. 52. Weight 3.6lbs (58oz)Propeller 22x10 Bolly RPM 6700 Thrust 23 Pounds

3.2 GAS ENG w/Smoke Muffler

4.2 All F.P.E. engines are easy to install and are ultra reliable. Best of all, their introductory prices represent one of the best values on the market for engines of this quality Cu. Inch F.P.E. 4.2 C.C. 69. Weight 5.5lbs (88oz) Propeller 24x10 Bolly RPM 6700 Thrust 34 Pounds

4.2 GAS ENG w/Ignition

FPE5.8 GAS ENG.W/SMOKE MUFFLER  Cu. Inch F.P.E. 5.8 C.C.95. Weight 5.9lbs (95oz) Propeller 26x10 Bolly RPM 6000 Thrust 43 Pounds

5.8 GAS ENG. w/Smoke Muffler